Kärcher K2 Premium pressure washer In Maintenance

Please read the attached manual and before each use of the pressure washer please make sure to:

•  CHECK WATER INLET FILTER IS CLEAR OF DIRT OR DEBRIS.

• CHECK THE WATER SUPPLY HOSE IS A MINIMUM OF 25 FEET LONG AND UNWOUND FROM THE HOSE REEL.

• ONLY USE A NON-RETURN VALVE AT THE TAP END OF THE SUPPLY HOSE.

• CHECK THAT, IF YOU ARE USING AN EXTENSION LEAD, IT IS RATED AT A MINIMUM OF 13 AMPS AND IS FULLY UNWOUND FROM THE REEL.

• CONNECT THE WATER SUPPLY, REMOVE THE LANCE, AND SQUEEZE THE TRIGGER TO RUN WATER THROUGH THE MACHINE BEFORE SWITCHING THE POWER ON.

  
  

  Helpful 'how to' guides can be found here: Kärcher how to guides